- Home
- Products
- > Power Management
- > Linear Regulator
- > DDR Terminator
EUP7996
1.5A DDR Termination RegulatorDescription
The EUP7996 is a high performance linear regulator designed to provide power for termination of a DDR memory bus. It significantly reduces parts count, board space and overall system cost over previous switching solutions.
The EUP7996 contains a high-speed operational amplifier to provide excellent response to load transients. The EUP7996 also incorporates a VSENSE pin to provide superior load regulation and a VREF output as a reference for chipset and DIMMs.
An additional feature found on the EUP7996 is an active low shutdown (SD) pin. When SD is pulled low the VTT output will Tri-state providing a high impedance output, but, VREF will remain active. A power savings advantage can be obtained in this mode through lower quiescent current.
The EUP7996, used in conjunction with series termination resistors, provides an excellent voltage source for active termination schemes of high speed transmission lines as those seen in high speed memory buses. A typical DDR memory system is seen in Datasheet.
Feature
- • Extremely low quiescent current (305uA)
- • Fast transient response time
- • Capable of sourcing and sinking 1.5A for DDR-I termination
- • Reference out for other memory and control components
- • Low-current shutdown mode
- • Over-temperature protection
- • High accuracy output voltage at full-load
- • Low external component count
- • Available in SOP-8, SOP(EP) package
- • RoHS Compliant and 100% Lead (Pb)-Free
Application
- • DDR-I and DDR-II termination voltage